Type B - Rigid (Long)

The Type B - Rigid Manhole Connector LONG SERIES is designed to be cast into a chamber wall on an angle between 60º-120º to the chamber wall. Post curing the extending internal spigot end can be cut flush with the inside of the Chamber wall. This eliminates significant internal shuttering during pouring and clean up plastering - see image below as an example of typical use.

For connections where the manhole connector is almost perpendicular to the Chamber wall use a Type B Rigid Short series connector 

 

Rigid Manhole Connector / SP / EF/ SDR17

Machined from PE100 hollow bar, this fitting includes a hydrophilic sealing ring in the outer edge of the puddle, sealed for exposure on site. Supplied in Long Spigot (LS) design for electrofusion joining on site and sizes DN800 and above are supplied for butt welding.

Product code Connection Size PE Pipe OD BF Spigot Long Spigot Length BF Length LS Length  
Butt Fusion Electrofusion spigot DN dn le le L L Availability in Hong Kong
  P5314.138.110   110   122   364 6-8 weeks
  P5314.138.125   125   118   356 6-8 weeks
  P5314.138.140   140   115   350 6-8 weeks
  P5314.138.160   160   110   340 6-8 weeks
  P5314.138.180   180   105   330 6-8 weeks
  P5314.138.200   200   112   344 6-8 weeks
  P5314.138.225   225   120   360 6-8 weeks
  P5314.138.250   250   190   500 6-8 weeks
  P5314.138.280   280   183   487 6-8 weeks
  P5314.138.315   315   237   599 6-8 weeks
  P5314.138.355   355   242   618 6-8 weeks
  P5314.138.400   400   254   657 6-8 weeks
  P5314.138.450   450   274   719 6-8 weeks
  P5314.138.500   500   301   786 6-8 weeks
  P5314.138.560   560   334   878 6-8 weeks
  P5314.138.630   630   380   996 6-8 weeks
  P5314.138.710   710   436   1137 6-8 weeks
  P5314.138.800   800   516   1328 6-8 weeks
      900         6-8 weeks
      1000         6-8 weeks
      1200         6-8 weeks
      1300         6-8 weeks
      1400         6-8 weeks
      1600         6-8 weeks
      1800         6-8 weeks
      2000         6-8 weeks

Note: Hydrophilic sealing ring is not fitted in the picture below.