Type B - Rigid (Short)

The Type-B rigid manhole connector SHORT SERIES is designed to be cast flush against the internal chamber wall.  Installed up against the internal formwork during chamber construction with the outlet approximately between 80-100º to the chamber wall. 

 

Type B - Rigid Manhole Connector / SP / EF / SDR17

Machined from PE100 hollow bar, this fitting includes a hydrophilic sealing ring in the outer edge of the puddle, sealed for exposure on site. Supplied in Long Spigot (LS) design for electrofusion joining on site and sizes DN800 and above are supplied for butt welding.

Product code Connection size PE Pipe OD BW spigot LS spigot BW Length LS Length  
Butt Fusion Spigot Electrofusion Spigot DN dn le le L L Availability in Hong Kong
  P531E.143.110 100 110   150   270 6-8 weeks
  P531E.143.160 150 160   150   270 6-8 weeks
  P531E.143.225 200 225   150   270 6-8 weeks
  P531E.143.250 225 250   250   370 Ex-stock
  P531E.143.280 250 280   250   371 6-8 weeks
  P531E.143.355 300 355   300   435 Ex-stock
  P531E.143.400 375 400   300   450 6-8 weeks
  P531E.143.450 400 450   300   470 6-8 weeks
  P531E.143.500 450 500   300   485 6-8 weeks
  P531E.143.560 500 560   300   510 6-8 weeks
  P531E.143.630 525 630   300   535 6-8 weeks
  P531E.143.710 600 710   300   565 6-8 weeks
  P531E.143.800 675 800   300   595 6-8 weeks
P231E.143.900   825 900 100   435   6-8 weeks
P231E.143.1000   900 1000 100   470   6-8 weeks
P231E.143.1200   1050 1200 100   545   6-8 weeks
P231D.143.1600   1350 1600 100   580   6-8 weeks
P231C.143.1800   1650 1800 100   535   6-8 weeks
P231C.143.2000   1800 2000 100   584   6-8 weeks

Note: Hydrophilic sealing ring is not fitted in the picture below.