22º Bends

22º Segmented Spigot CCTV Bends / PN10 / SDR17 / Twin Stripe

Manufactured from Mill-Pro M90SE PE100 RC SDR17 CCTV pipe and fabricated according to BS EN 12201-3, clause B.3, using butt weld techniques according to BS ISO 21307. They feature long spigots for electrofusion or butt fusion joining and 1D and 2D bar code stickers for complete product traceability.

Segmented bends are manufactured from a pipe, with cut angles ≤ 7.5º and therefore are not subject to pressure de-ration factor required in BS EN 12201 Clause B.3. Generally, the internal weld beads are removed where possible and external weld beads are not removed unless ordered otherwise. 

Any bend angle from 16º to 30º can be custom manufactured, standard angle for a two mitre bend is 22º with a radius of 2.5 x OD, as given in the table below.

NOTE: The spigot ends must be prepared in accordance with the general installation instructions using a spigot mechanical peeler, 90% Isopropyl alcohol wipes.

Larger sizes to dn2000 in PN ratings from PN4 to PN10 are available in M100E pipe, subject to pipe availability.
Bends with brown or green twin stripes can only be supplied when also supplying the matching pipe.
To transport large bore bends, these may need to be made in sections and joined on site.
PN10 SDR17 Twin Brown Sewer PN10 SDR17 Twin Green Stormwater dn le r = 2.5 dn Z - 22º Two mitre Availability in Hong Kong
P5Q54.285.110 P5QG4.285.110 110 150 275 203 6-8 Weeks
P5Q54.285.160 P5QG4.285.160 160 150 400 228 6-8 Weeks
P5Q54.285.225 P5QG4.285.225 225 150 563 259 6-8 Weeks
P5Q54.285.250 P5QG4.285.250 250 250 625 371 6-8 Weeks
P5Q54.285.280 P5QG4.285.280 280 250 700 386 6-8 Weeks
P5Q54.285.355 P5QG4.285.355 355 300 888 473 6-8 Weeks
P5Q54.285.400 P5QG4.285.400 400 300 1000 494 6-8 Weeks
P5Q54.285.450 P5QG4.285.450 450 300 1125 519 6-8 Weeks
P5Q54.285.500 P5QG4.285.500 500 350 1250 593 6-8 Weeks
P5Q54.285.560 P5QG4.285.560 560 350 1400 622 6-8 Weeks
P5Q54.285.630 P5QG4.285.630 630 350 1575 656 6-8 Weeks
P5Q54.285.710 P5QG4.285.710 710 350 1775 695 6-8 Weeks
P5Q54.285.800 P5QG4.285.800 800 350 2000 739 6-8 Weeks
P5Q54.285.900 P5QG4.285.900 900 400 2250 837 6-8 Weeks
P5Q54.285.1000 P5QG4.285.1000 1000 400 2500 886 6-8 Weeks
P5Q54.285.1200 P5QG4.285.1200 1200 400 3000 983 6-8 Weeks
P5Q54.285.1400 P5QG4.285.1400 1400 550 3500 1230 6-8 Weeks
P5Q54.285.1600 P5QG4.285.1600 1600 550 4000 1328 6-8 Weeks

 

22º Segmented Spigot CCTV Bends / PN16 / SDR11 / Twin Stripe

As above, segmented bends fabricated from PN16 / SDR 11 CCTV twin stripe pipe

dn1000 is the largest size pipe and therefore is the largest bend size available in PN16/SDR11.
Other PN ratings from PN4 to PN25 are available on request, subject to pipe availability.
Bends with brown or green twin stripes can only be supplied when also supplying the matching pipe.
To transport large bore bends, these may need to be made in sections and joined on site.
PN16 SDR11 Twin Brown Sewer PN16 SDR11 Twin Green Stormwater dn le r = 2.5 dn Z - 22º Two mitre Availability in Hong Kong
P5Q56.285.110 P5QG6.285.110 110 150 275 203 6-8 Weeks
P5Q56.285.160 P5QG6.285.160 160 150 400 228 6-8 Weeks
P5Q56.285.225 P5QG6.285.225 225 150 563 259 6-8 Weeks
P5Q56.285.250 P5QG6.285.250 250 250 625 371 6-8 Weeks
P5Q56.285.280 P5QG6.285.280 280 250 700 386 6-8 Weeks
P5Q56.285.355 P5QG6.285.355 355 300 888 473 6-8 Weeks
P5Q56.285.400 P5QG6.285.400 400 300 1000 494 6-8 Weeks
P5Q56.285.450 P5QG6.285.450 450 300 1125 519 6-8 Weeks
P5Q56.285.500 P5QG6.285.500 500 350 1250 593 6-8 Weeks
P5Q56.285.560 P5QG6.285.560 560 350 1400 622 6-8 Weeks
P5Q56.285.630 P5QG6.285.630 630 350 1575 656 6-8 Weeks
P5Q56.285.710 P5QG6.285.710 710 350 1775 695 6-8 Weeks
P5Q56.285.800 P5QG6.285.800 800 350 2000 739 6-8 Weeks
P5Q56.285.900 P5QG6.285.900 900 400 2250 837 6-8 Weeks
P5Q56.285.1000 P5QG6.285.1000 1000 400 2500 886 6-8 Weeks

 

Black 22º Fabricated spigot elbows PN10-PN16 / SDR17-SDR11

Fabricated elbows are designed for applications where there is insufficient space for segmented bends to be used. Manufactured from black PE100+ compound, they feature long spigots for electrofusion or butt fusion joining on site. Any fabricated elbow angle from 1º to 45º can be manufactured. Tables below show standard 22º elbow with a radius of ~0.5xOD.

Custom fabricated elbows do not require pipe to manufacture. Individual elbows may be ordered in any angle.
PN10 SDR17 PN16 SDR11 d1 le1 r z1 - 22º Availability in Hong Kong
P5314.77.355 P5316.77.355 355 200 177 326 14-16 weeks
P5314.77.400 P5316.77.400 400 300 200 431 14-16 weeks
P5314.77.450 P5316.77.450 450 300 225 436 14-16 weeks
P5314.77.500 P5316.77.500 500 300 250 450 14-16 weeks
P5314.77.560 P5316.77.560 560 300 280 478 14-16 weeks
P5314.77.630 P5316.77.630 630 300 315 491 14-16 weeks
P5314.77.710 P5316.77.710 710 500 355 697 14-16 weeks
P5314.77.800 P5316.77.800 800 500 400 702 14-16 weeks
P5314.77.900 P5316.77.900 900 500 450 776 14-16 weeks
P5314.77.1000 P5316.77.1000 1000 500 500 790 14-16 weeks
P5314.77.1200 - 1200 500 600 768 14-16 weeks
P5314.77.1400 - 1400 500 700 846 14-16 weeks

 

Two Mitre Custom Segment Spigot Bends / PN4-25 / SDR41-7.4

As above, single mitre segmented bends are manufactured from pipes supplied for the contract, such as M90SE or M100E, in any angle from 16º to 30º with radii from 1.5 - 2.5xOD. Bend sizes are only limited by the pipes size and rating. See M100 pipe tables for the maximum pipe DN/OD at a given SDR rating. Contact us for specific bend requirements.