11º Bends

11º Segmented Spigot CCTV Bends / PN10 / SDR17 / Twin Stripe

Manufactured from Mill-Pro M90SE PE100 RC SDR17 CCTV pipe and fabricated according to BS EN 12201-3, clause B.3, using butt weld techniques according to BS ISO 21307. They feature long spigots for electrofusion or butt fusion joining and 1D and 2D bar code stickers for complete product traceability. 

Segmented bends are manufactured from a pipe, with cut angles ≤ 7.5º and therefore are not subject to pressure de-ration factor required in BS EN 12201 Clause B.3. Generally, the internal weld beads are removed where possible and external weld beads are not removed unless ordered otherwise. 

Any bend angle from 0º to 15º can be custom manufactured, standard angle for a single mitre bend is 11º with a radius of 2.5 x OD, as given in the table below.

NOTE: The spigot ends must be prepared in accordance with the general installation instructions using a spigot mechanical peeler, 90% Isopropyl alcohol wipes.

PN10 SDR17 Twin Brown Sewer PN10 SDR17 Twin Green Stormwater dn le r = 2.5 dn Z - 11º One mitre Availability in Hong Kong
P5Q54.290.110 P5QG4.290.110 110 150 275 176 6-8 Weeks
P5Q54.290.160 P5QG4.290.160 160 150 400 189 6-8 Weeks
P5Q54.290.225 P5QG4.290.225 225 150 563 204 6-8 Weeks
P5Q54.290.250 P5QG4.290.250 250 250 625 310 6-8 Weeks
P5Q54.290.280 P5QG4.290.280 280 250 700 317 6-8 Weeks
P5Q54.290.355 P5QG4.290.355 355 300 888 385 6-8 Weeks
P5Q54.290.400 P5QG4.290.400 400 300 1000 396 6-8 Weeks
P5Q54.290.450 P5QG4.290.450 450 300 1125 408 6-8 Weeks
P5Q54.290.500 P5QG4.290.500 500 350 1250 470 6-8 Weeks
P5Q54.290.560 P5QG4.290.560 560 350 1400 485 6-8 Weeks
P5Q54.290.630 P5QG4.290.630 630 350 1575 502 6-8 Weeks
P5Q54.290.710 P5QG4.290.710 710 350 1775 521 6-8 Weeks
P5Q54.290.800 P5QG4.290.800 800 350 2000 543 6-8 Weeks
P5Q54.290.900 P5QG4.290.900 900 400 2250 617 Contact us
P5Q54.290.1000 P5QG4.290.1000 1000 400 2500 641 Contact us
P5Q54.290.1200 P5QG4.290.1200 1200 400 3000 689 Contact us
P5Q54.290.1400 P5QG4.290.1400 1400 550 3500 887 Contact us
P5Q54.290.1600 P5QG4.290.1600 1600 550 4000 935 Contact us

Note:

1. Larger sizes to dn2000 in PN ratings from PN4 to PN10 are available in M100E pipe, subject to pipe availability.

2. Bends with brown or green twin stripes can only be supplied when also supplying the matching pipe.

11º Segmented Spigot CCTV Bends / PN16 / SDR11 / Twin Stripe

As above, segmented bends fabricated from PN16 / SDR 11 CCTV twin stripe pipe

PN16 SDR11 Twin Brown Sewer PN16 SDR11 PN16 Twin Green Stormwater dn le r = 2.5 dn

Z - 11º One mitre

Availability in Hong Kong
P5Q56.290.110 P5QG6.290.110 110 150 275 176 6-8 Weeks
P5Q56.290.160 P5QG6.290.160 160 150 400 189 6-8 Weeks
P5Q56.290.225 P5QG6.290.225 225 150 563 204 6-8 Weeks
P5Q56.290.250 P5QG6.290.250 250 250 625 310 6-8 Weeks
P5Q56.290.280 P5QG6.290.280 280 250 700 317 6-8 Weeks
P5Q56.290.355 P5QG6.290.355 355 300 888 385 6-8 Weeks
P5Q56.290.400 P5QG6.290.400 400 300 1000 396 6-8 Weeks
P5Q56.290.450 P5QG6.290.450 450 300 1125 408 6-8 Weeks
P5Q56.290.500 P5QG6.290.500 500 350 1250 470 6-8 Weeks
P5Q56.290.560 P5QG6.290.560 560 350 1400 485 6-8 Weeks
P5Q56.290.630 P5QG6.290.630 630 350 1575 502 6-8 Weeks
P5Q56.290.710 P5QG6.290.710 710 350 1775 521 6-8 Weeks
P5Q56.290.800 P5QG6.290.800 800 350 2000 543 6-8 Weeks
P5Q56.290.900 P5QG6.290.900 900 400 2250 617 Contact Us
P5Q56.290.1000 P5QG6.290.1000 1000 400 2500 641 Contact Us

Note:

1. dn1000 is the largest size pipe and therefore is the largest bend size available in PN16/SDR11

2. Other PN ratings from PN4 to PN25 are available on request, subject to pipe availability.

3. Bends with brown or green twin stripes can only be supplied when also supplying the matching pipe.

Black 11º Fabricated Spigot Elbows / PN10-PN16 / SDR17-SDR11

Fabricated elbows are designed for applications where there is insufficient space for segmented bends to be used. Manufactured from black PE100+ compound, they feature long spigots for electrofusion or butt fusion joining on site. Any fabricated elbow angle from 1º to 45º can be manufactured. Tables below show standard 11º elbow with a radius of ~0.5xOD.

Product Code PN10 SDR17

Product Code PN16 SDR11 d1 le1 r z1 - 11º Availability in Hong Kong
P5314.76.355 P5316.76.355 355 200 177 309 14-16 weeks
P5314.76.400 P5316.76.400 400 300 200 411 14-16 weeks
P5314.76.450 P5316.76.450 450 300 225 413 14-16 weeks
P5314.76.500 P5316.76.500 500 300 250 426 14-16 weeks
P5314.76.560 P5316.76.560 560 300 280 451 14-16 weeks
P5314.76.630 P5316.76.630 630 300 315 460 14-16 weeks
P5314.76.710 P5316.76.710 710 500 355 662 14-16 weeks
P5314.76.800 P5316.76.800 800 500 400 663 14-16 weeks
P5314.76.900 P5316.76.900 900 500 450 732 14-16 weeks
P5314.76.1000 P5316.76.1000 1000 500 500 741 14-16 weeks
P5314.76.1200 1200 SDR 11 not available 1200 500 600 709 14-16 weeks
P5314.76.1400 1400 SDR 11 not available 1400 500 700 777 14-16 weeks

Note: Custom fabricated elbows do not require pipe to manufacture. Individual elbows may be ordered in any angle.

Black 11º Injection Moulded Electrofusion Spigot Elbows / PN16 / SDR11

Friatec's PE100 RC Injection moulded electrofusion elbows are suitable for fusing to PN10 and PN16 pipes.  Electrofusion sockets feature all the same performance benefits found in black couplers. This fitting has an electrofusion socket one end and spigot the other, allowing two elbows to be combined together to provide an adjustable angle from 0º to 22º.   

NOTE: The pipe, socket and spigot ends must be prepared in accordance with the general installation instructions using a spigot mechanical peeler, 90% Isopropyl alcohol wipes and we recommend using the Friamat fusion control unit to achieve correct preheating and logging the full range of weld data available.

Product Code dn D1 L L1 L2 le Z Availability in Hong Kong
P3316.112.110 110 141 235 79 32 82 156 6-8 Weeks
P3316.112.125 125 160 250 84 34 87 166 6-8 Weeks
P3316.112.160 160 200 295 93 50 98 202 6-8 Weeks
P3316.112.180 180 226 310 100 50 105 210 6-8 Weeks
P3316.112.225 225 280 350 114 50 120 236 6-8 Weeks

Single Mitre Custom Segmented Spigot Bends / PN4-25 / SDR41-7.4

As above, single mitre segmented bends are manufactured from pipes supplied for the contract, such as M90SE or M100E, in any angle from 1º to 15º with radii from 1.5 - 2.5xOD. Bend sizes are only limited by the pipes size and rating. See M100 pipe tables for the maximum pipe DN/OD at a given SDR rating. Contact us for specific requirements.