45º Bends

45º Segmented Spigot CCTV Bends / PN10 / SDR17 / Twin Stripe

Manufactured from Mill-Pro M90SE PE100 RC SDR17 CCTV pipe and fabricated according to BS EN 12201-3, clause B.3, using butt weld techniques according to BS ISO 21307. They feature long spigots for electrofusion or butt fusion joining and 1D and 2D bar code stickers for complete product traceability.

Segmented bends are manufactured from a pipe, with cut angles ≤ 7.5º and therefore are not subject to pressure de-ration factor required in BS EN 12201 Clause B.3. Generally, the internal weld beads are removed where possible and external weld beads are not removed unless ordered otherwise. 

Any bend angle from 31º to 45º can be custom manufactured, standard angle for a three mitre bend is 45º with a radius of 2.5 x OD, as given in the table below.

NOTE: The spigot ends must be prepared in accordance with the general installation instructions using a spigot mechanical peeler, 90% Isopropyl alcohol wipes.

PN10 SDR17 Twin Brown Sewer

PN10 SDR17 Twin Green Stormwater

dn

le

r = 2.5 dn

Z - 45º Triple mitre

Availability in Hong Kong

P5Q54.287.110

P5QG4.287.110

110

150

275

264

6-8 weeks

P5Q54.287.160

P5QG4.287.160

160

150

400

316

6-8 weeks

P5Q54.287.225

P5QG4.287.225

225

150

563

383

6-8 weeks

P5Q54.287.250

P5QG4.287.250

250

250

625

509

6-8 weeks

P5Q54.287.280

P5QG4.287.280

280

250

700

540

6-8 weeks

P5Q54.287.355

P5QG4.287.355

355

300

888

668

6-8 weeks

P5Q54.287.400

P5QG4.287.400

400

300

1000

714

6-8 weeks

P5Q54.287.450

P5QG4.287.450

450

300

1125

766

6-8 weeks

P5Q54.287.500

P5QG4.287.500

500

350

1250

868

6-8 weeks

P5Q54.287.560

P5QG4.287.560

560

350

1400

930

6-8 weeks

P5Q54.287.630

P5QG4.287.630

630

350

1575

1002

6-8 weeks

P5Q54.287.710

P5QG4.287.710

710

350

1775

1085

6-8 weeks

P5Q54.287.800

P5QG4.287.800

800

350

2000

1178

6-8 weeks

P5Q54.287.900

P5QG4.287.900

900

400

2250

1332

6-8 weeks

P5Q54.287.1000

P5QG4.287.1000

1000

400

2500

1436

6-8 weeks

P5Q54.287.1200

P5QG4.287.1200

1200

400

3000

1643

6-8 weeks

P5Q54.287.1400

P5QG4.287.1400

1400

550

3500

2000

6-8 weeks

P5Q54.287.1600

P5QG4.287.1600

1600

550

4000

2207

6-8 weeks

Note:

1. Larger sizes to dn2000 in PN ratings from PN4 to PN10 are available in M100E pipe, subject to pipe availability.

2. Bends with brown or green twin stripes can only be supplied when also supplying the matching pipe.

Three Mitre Custom Segment Spigot Bends / PN4-25 / SDR41-7.4

As above, three mitre segmented bends are manufactured from pipes supplied for the contract, such as M90SE or M100E, in any angle from 31º to 45º with radii from 1.5 - 2.5xOD. Bend sizes are only limited by the pipes size and rating. See M100 pipe tables for the maximum pipe DN/OD at a given SDR rating. Contact us for specific requirements.