11º Bends

11º Swept Spigot CCTV Bends / SN24 / SDR17 / Striped

To be added

11º Segmented Spigot CCTV Bends / SN24 / SDR17 / Striped

Manufactured from Mill-Pro M90SE PE100 RC SDR17 CCTV pipe and fabricated according to BS EN 12201-3, clause B.3, using butt weld techniques according to BS ISO 21307. They feature long spigots for electrofusion or butt fusion joining and 1D and 2D bar code stickers for complete product traceability. 

Segmented bends are manufactured from a pipe, with cut angles ≤ 7.5º. Generally, the internal weld beads are removed where possible and external weld beads are not removed unless ordered otherwise. 

Any bend angle from 0º to 15º can be custom manufactured, standard angle for a single mitre bend is 11º with a radius of ≥ 4 x OD, as given in the table below.

NOTE: The spigot ends must be prepared in accordance with the general installation instructions using a spigot mechanical peeler, 90% Isopropyl alcohol wipes.

PN10 SDR17 Brown Sewer PN10 SDR17 Green Stormwater dn le r = 2.5 dn Z - 11º One mitre Availability in Hong Kong
P5Q54.290.110 P5QG4.290.110 110 150 275 176 6-8 Weeks
P5Q54.290.160 P5QG4.290.160 160 150 400 189 6-8 Weeks
P5Q54.290.225 P5QG4.290.225 225 150 563 204 6-8 Weeks
P5Q54.290.250 P5QG4.290.250 250 250 625 310 6-8 Weeks
P5Q54.290.280 P5QG4.290.280 280 250 700 317 6-8 Weeks
P5Q54.290.355 P5QG4.290.355 355 300 888 385 6-8 Weeks
P5Q54.290.400 P5QG4.290.400 400 300 1000 396 6-8 Weeks
P5Q54.290.450 P5QG4.290.450 450 300 1125 408 6-8 Weeks
P5Q54.290.500 P5QG4.290.500 500 350 1250 470 6-8 Weeks
P5Q54.290.560 P5QG4.290.560 560 350 1400 485 6-8 Weeks
P5Q54.290.630 P5QG4.290.630 630 350 1575 502 6-8 Weeks
P5Q54.290.710 P5QG4.290.710 710 350 1775 521 6-8 Weeks
P5Q54.290.800 P5QG4.290.800 800 350 2000 543 6-8 Weeks
P5Q54.290.900 P5QG4.290.900 900 400 2250 617 Contact us
P5Q54.290.1000 P5QG4.290.1000 1000 400 2500 641 Contact us
P5Q54.290.1200 P5QG4.290.1200 1200 400 3000 689 Contact us
P5Q54.290.1400 P5QG4.290.1400 1400 550 3500 887 Contact us
P5Q54.290.1600 P5QG4.290.1600 1600 550 4000 935 Contact us

Note:

1. Larger sizes to dn2000 in SN ratings from SN3 to SN381 are available in M100E pipe, subject to pipe availability.

2. Bends with brown or green stripes can only be supplied when also supplying the matching pipe.

Single Mitre Custom Segmented Spigot Bends / SN3-381 / SDR33-7.4

As above, single mitre segmented bends are manufactured from pipes supplied for the contract, such as M90SE or M100E, in any angle from 1º to 15º with radii ≥ 4 x OD. Bend sizes are only limited by the pipes size and rating. See M100 pipe tables for the maximum pipe DN/OD at a given SDR rating. Contact us for specific requirements.