PE Water Pipe

Pe Water Pipe

Mill-Pro manufacturers three pipe configurations in two PE100 compound options

M10-Pipe

A blue pipe comprising of a 10% externally co-extruded indication layer to identify use. The pipe is co-extruded using identical base compounds complying to BS EN 12201-1 to produce a single homogeneous pipe, the colours are not separable. The outer colour thickness is accurate to 10% (+/-1.5%) thereby providing a damage depth indicator – If the black inner colour is visible, the pipe is damaged and cannot be used or must be replaced if already installed.

M80-Pipe

As above, a three-colour pipe comprising of a 10% externally co-extruded indication layer to identify use and provide a damage depth indication and an internal co-extruded light colour layer providing significantly improved CCTV imaging. Pipes are extruded using the same compound types and brands to ensure a single homogeneous pipe. 

M100 / M100S-Pipe

A single colour 100% solid wall pipe either plain or black with co-extruded coloured striping to indicate use (Sewer, Stormwater, water, gas).

COMPOUNDS

Standard – Pipe manufactured from a PE100+ association approved compound www.pe100plus.com providing a minimum of 1000 hrs slow crack growth performance when tested in accordance with EN 13479.

Extreme – Pipe manufactured from a PE100RC an extreme slow crack growth resistant compound, providing a minimum of 8760 hrs slow crack growth resistance (9x a high quality PE100 Compound). PE100RC refers to “Resistance to Crack” as detailed in PAS 1075:2009-04. These compounds provide resistance to PE pipe failure caused by rock impingement or damage. They are designed for applications where sand bedding is not possible or where backfill or bedding material quality is poor or where secondary excavation could leave pipes without the required backfill. Read more about PE100RC compounds or refer to the Borouge website on Borsafe™ HE3490-LS-H here.

PE100 RC compound manufacturers – updated as at Q1 2018

Manufacturer

Model

Colour

Borealis

Borsafe HE3490LS-H

Black

 

Borsafe HE3494LS-H

Blue

 

Borsafe HE3492LS-H

Orange

Borouge

Borsafe HE3490LS-H

Black

 

Borsafe HE3492LS-H

Orange

Sabic

P6006RC Black

Black

 

P6006RC Blue

Blue

Total

XSC50 Orange

Orange

Basell

Hostalen CRP100 RESIST CR Black

Black

 

Hostalen CRP100 RESIST CR Blue

Blue

 

Hostalen CRP100 RESIST CR Orange

Orange

Ineos

Eltex TUB 121N6000

Black

 

Eltex TUB 124N6000

Blue

 

Eltex TUB 125N6000

Orange

Qenos

Alkadyne HCR193B

Black

Note:

1. Mill-Pro only uses 100% virgin pre-compounded materials complying to BSEN, ISO, AS/NZS standards for its pipe products.

2. Mill-Pro does not manufacture PE 80 pipe or use any recycled materials in the manufacture of any of its products, although our products are 100% end of life recyclable.